These PVC bathroom panels from Zest are a great alternative to tiles. Can be used for simple and hassle free fitting and care and are a fraction of the cost when compared with tiling
- Suitable for use in rooms that reach up to 60 degrees celsius.
- Affix to a clean flat wall, ceiling or over existing tiles with a solvent free/moisture cure adhesive or neutral cure silicone.
- Fix to damp or damaged walls by fitting 38mm x 19mm battens horizontally at 400mm centres and a breathable membrane is recommended.
- Can be fitted behind radiators and hot water pipes.
- Can be installed behind a gas or electric hob if protected by a piece of heat resistant glass.
| SKU | SWRM3003P |
|---|---|
| Width | 250mm |
| Material | PVC |
| Finish | Matt |
| Design | Stone Effect |
| Join | Tongue and Groove |
| Seam | Flush |
| Length | 2,600mm |
| Thickness | 5mm |
| Important Information | Due to manufacturing processes, some colour variation can occur between batches. Please retain the batch number found on the product packaging or the back of the panels. |
| Brand | Zest Wall Panels |
| Nearest Colour Standard | No nearest equivalent |
| Colour | Grey |
| Brand Colour | Portland |
| Storage Advice | All of our products should be stored flat, out of direct sunlight and all courier packaging must be removed immediately to prevent warping |
| Use With | Walls and Ceilings |
| Pack Size | 4 |

















Reviews
There are no reviews yet.